Alumon Black CRO

Alumon Black CRO


Alumon Black CRO has a unique ability to impart a full black color to thin films, it is well suited for continuous coil applications.

Chemical Properties
Physical appearance Black to dark grey powder
Chemical description metalized metal-free azo dyes
Light Fatness 3-5 poor
Weather fastness Moderate
Heat Fastness Very Good
RECOMMENDED APPLICATION DETAILS
Anodic coating thickness 8 - 15 microns.
Concentration 10 g/l
pH Range 4.5 - 7.0
Buffering Not required
Dye bath temperature 50° - 60° C.
Immersion time 8 - 10 minutes

SEALING:

The dyed oxide film must be properly sealed properly using a hot sealing salt ANO SEAL CA-350 for best result.

Other Recommendation:

  • Ammonium compounds shall not be used for controlling of the pH or to buffer dye bath solution.
  • The presence of ammonium compounds in the sealing solution may cause leaching and loss of color.
  • Use sodium acetate for dye buffer.
  • Adequate care to be taken for proper rinsing to control drag-in for optimum tank life.
  • Dye may be dissolved separately outside the dye bath. Use demineralized water for better dye bath stability.
  • The life of dye bath is reduced by water containing ammonium.